|
|
|
| |
Home > Categories > Industry (and all sub-categories including: Textiles, Occupational Safety, Manufacturing, Construction, Facility Maintenance, Farming, Energy, Agriculture & Dairy, Alternative Energy, Energy Conservation, Industrial Equipment, Contracting, Transportation/Shipping, Other Industry) |
|
|
|
|
|
436 Articles Under This Category
Now Displaying Page 4, Articles 76 to 100
Previous | Next Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 |
|
Why Would I Consider Installing Roofing Shingles in Cold Weather? -
Steven Briesemeister (8,159)   
Steven Briesemeister
Unfortunately, your roof won’t usually pick warm and clear days to break, obviously it is much more common for your roof to develop leaks and problems when the rain is beating down and the wind is blowing a gale. Even if the roof does get damaged on a calm day it is really quite unlikely that... ( added 3 years 155 days ago.) |
Types of Flat Roofing Materials -
Steven Briesemeister (8,159)
Steven Briesemeister
It’s a fact that your roof is one of the most important parts of your house and is the one thing that provides the building structure, the building occupants and the building contents with protection from the elements. Many roofs are in a state of disrepair but homeowners ignore this until the... ( added 3 years 155 days ago.) |
How Long to Install a New Roof? -
Steven Briesemeister (8,159)
Steven Briesemeister
The roof is by far one of the most important parts of your house when it comes to protecting the rest of the building and it’s occupants from extreme weather conditions and many roofs are in a state of disrepair. Yet, despite this, they are left to worsen before people are willing to act and... ( added 3 years 155 days ago.) |
| |
|
|
| |
3 Tab Roofing Shingles -
Steven Briesemeister (8,159)
Steven Briesemeister
A shingle that shows 3 tabs, or measures 3 feet, is fittingly known as 3-tab roofing shingles. They are normally guaranteed for 20 years and help the roof to have a smooth, defined look. Depending on the manufacturer, 3-tab shingles are often available in 20, 25 or even 30 year limited... ( added 3 years 155 days ago.) |
Algae Resistant Roof Shingles -
Steven Briesemeister (8,159)
Steven Briesemeister
Many homeowners are burdened with unwelcome house guests every year. It’s not the kind of guests that you’re thinking of, however, as this guest doesn’t enter the home. It invites itself to sit on your roof and causes unsightly discoloration. It’s algae and it effects a lot of homeowners... ( added 3 years 155 days ago.) |
Have You Got A Leaky Skylight? -
Steven Briesemeister (8,159)
Steven Briesemeister
Why have I got a leaky skylight?
A skylight is an excellent source of both warmth and light for your home and they can enhance the overall appearance of your house as well as giving you a little extra air when required. There are a number of different factors that can lead to a leaky... ( added 3 years 155 days ago.) |
The Durability of Standing Seam Metal Roofing -
Steven Briesemeister (8,159)
Steven Briesemeister
The job of your roof.
The roof is the one part of the house that takes the most damage when protecting us from the elements. It has to cope with extreme conditions ranging from wintry ice to summer sun and often it can face both extremes at the same time. Many substances simply can not... ( added 3 years 155 days ago.) |
Roof Preparation before Installing Roof Shingles -
Steven Briesemeister (8,159)
Steven Briesemeister
Installing roof shingles can be an arduous task and should not be attempted if you don’t know what you are doing. It is vital to ensure that you complete adequate roof preparation before installing roof shingles otherwise you are risking the integrity of your new roof. A poorly prepared roof... ( added 3 years 155 days ago.) |
All About Copper Roof Shingles -
Steven Briesemeister (8,159)
Steven Briesemeister
The world is full of copper lovers, and lovers of the copper roof are by no means an exception. There are essentially two different types of copper roof you can buy, there is the solid copper roof that consists solely of sheet copper on your roof. It is very resilient to weathering and will... ( added 3 years 155 days ago.) |
How To Find A Roof Leak -
Steven Briesemeister (8,159)
Steven Briesemeister
There are many resources on how to find a roof leak but, most of the time, homeowners can locate the problem themselves within minutes. After all, if your roof is leaking, who has time to run out to the store and buy a home repair book or even ask someone how to find a roof leak? A leaking... ( added 3 years 155 days ago.) |
Simple Flat Roof Leak -
Steven Briesemeister (8,159)
Steven Briesemeister
A flat roof is more prone to leaks due to the fact that the roof has no pitch for snow and other debris to slide off, so it remains on the roof until we remove it. This can cause an array of damage, including snow and ice damage, holes from debris, heavy weight causing structure damage and... ( added 3 years 155 days ago.) |
Do I Need A New Roof? -
Steven Briesemeister (8,159)
Steven Briesemeister
You may be asking yourself, “Do I need a new roof?" If you are also asking yourself the following questions, then you want to seriously consider a roof replacement:
1. Upon inspection of my roof, I noticed algae growth. Do I need a new roof?
2. I noticed curling and blistering on my... ( added 3 years 155 days ago.) |
Using Reflective Roofing Materials -
Steven Briesemeister (8,159)
Steven Briesemeister
The temperature of your roof plays a very important part in a number of different environmental factors within your home. If your roof collects heat without reflecting any then your home will get incredibly hot during the summer months meaning you will have to pay more for energy bills to keep... ( added 3 years 155 days ago.) |
Lowering Your Total Roof Cost -
Steven Briesemeister (8,159)
Steven Briesemeister
Having a new roof fitted or paying for repairs can sometimes lead to high roof costs, but there are ways to ensure that your roof cost does not become astronomical. The first thing to remember is that with materials you usually have to pay for quality but by adding that little extra to your... ( added 3 years 155 days ago.) |
How To Find A Flat Roof Leak - Infrared -
Steven Briesemeister (8,159)
Steven Briesemeister
A roof leak is caused by one thing - moisture. This can sometimes be difficult to detect, but technology has provided roofing professionals with a new method of how to find a flat roof leak using infrared survey. Because of their simplicity, flat roofs are very common. Unfortunately, also... ( added 3 years 155 days ago.) |
Roofing Shingles and Roof Calculator 6.1 -
Steven Briesemeister (8,159)
Steven Briesemeister
Only professional roofers and contractors know how much work, measurement, and precision go into each roofing job what looks like a simple pattern of overlapping roofing shingles is actually the last step in a very involved process. From measurements to laying plywood to affixing each and... ( added 3 years 155 days ago.) |
The Case of Psychrotrophic Bacteria -
Leon the Milkman (99) 
Leon the Milkman
Psychrotrophic bacteria seem to be becoming the newest thorn in the side of the dairy industry. Scary bit is that we are helping them along. "How?" do you ask? Because of economic factors the pre-processing time of raw milk has been extended to an average of 4 days. This allows ample time for... ( added 3 years 159 days ago.) |
Pseudomonas In Cottage Cheese and Dairy -
Leon the Milkman (99)
Leon the Milkman
Under refrigerated conditions, Gram-negative rods that are able to produce under such conditions ( psychrotrophic/cold-loving bacteria ) usually predominate, especially Pseudomonas spp. This is especially so when the milk has a high initial infection of these bacteria and the milk is stored for... ( added 3 years 159 days ago.) |
Why Should I Cover My Air Conditioner During the Off Season? -
Brian Jones (52)  
Air conditioning manufacturers make rugged, high quality products that are designed to withstand the elements i.e. snow, wind, rain, sun, and extreme heat/cold. However, an air conditioner's filters, coils and fins require regular maintenance for the unit to operate effectively and efficiently... ( added 3 years 176 days ago.) |
Types of Chip Formation During Machining -
cyberryo (507) 
cyberryo 
As every one knows, chips are formed during the machining of workpieces. The side of the chip in contact with the cutting tool is normally shiny, flat and smooth while the other side, which is the free workpiece surface, is jagged due to shear. It is important to study the formation of chips... ( added 3 years 241 days ago.) |
Did Factory Farmings Create Avian Flu? -
Walter Jeffries (73) 
Walter Jeffries 
One of the big excuses used by the USDA and states to argue for NAIS is bird flu, also known as Avian Influenza (H5N1) or Avian Flu and Exotic New Castle Disease. I have been receiving a lot of email from people about several new reports that Factory Farming is what is behind bird flu.
"The... ( added 3 years 246 days ago.) |
Free As Air -
Richard H Henley (358) 
Richard H Henley
How often have you heard the expression “free as the air we breathe”? We do not see the air we breathe or the air we use. The latter is most frequently “compressed air” and it is certainly not free. Actually, compressed air is a costly, but very valuable, servant of mankind, typically produced by... ( added 3 years 282 days ago.) |
| |
|
|
| |
Increasing Applications of Micro Bubbles -
cyberryo (507)
cyberryo
There have been a lot of research studies on micro bubbles in recent years.
Micro bubbles are miniature gas bubbles of less than 50 microns diameter in water. The micro bubbles, which mostly contain oxygen or air, can remain suspended in the water for an extended period. Gradually, the gas... ( added 3 years 298 days ago.) |
How To Use Diamond Tool To Cut Steel In Micro Machining? -
cyberryo (507)
cyberryo
The diamond tool is commonly used in micro-machining as it can withstand the micro hardening of the workpiece surface during micro-machining. This micro-hardening creates enough resistance to break the tool bit easily in micro milling, but not a diamond tool. Micro-machining using diamond tool... ( added 3 years 310 days ago.) |
Why Does The Tool Bit Break Easily In Micro Milling? -
cyberryo (507)
cyberryo
Micro milling is one of the three common micro cutting techniques used in micro machining.
In micro milling, the tool bit with diameter as small as 0.1mm is held in a high speed spindle rotating at 20,000 to 150,000 rpm, and used to mill steel, brass and aluminum with depth of cut at about 30... ( added 3 years 312 days ago.) |
|
|
| |
|
436 Articles Total in this category
Previous | Next Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Submit an Article!
|
|
 for
the most recent articles under Other Industry ?
|
|
