|
|
50 Articles Under This Category
Now Displaying Page 1, Articles 1 to 25
Next Page 1 2 3 |
|
Making Safety Pressure Vessels For Industrial Systems -
Thomas Yoon (4,642)     
Thomas Yoon 
Have you ever attended a children's party where the balloons started to burst when they were pricked? Sometimes, balloons begin to burst even while they are being filled up. They created a loud noise don't they? And the remains of the balloon simply flew away in any direction. But balloons... ( added 13 days 7 hours ago.) |
The Need for Even Better Municipal Water Filtration -
Anne Sinclair (2,610) 
Municipal water filtration systems have been around for centuries. Even people several centuries back realized the need for safe, clean public water and started demanding it from their leaders. This demand was based on an Enlightenment period concept that people had certain natural rights, such... ( added 16 days 22 hours ago.) |
Is There Water you Need to Avoid During a Disaster or Emergency Situation? -
Anne Sinclair (2,610)
It seems like no matter how often you turn on the TV news or open a newspaper, there's somewhere in the world that is facing some type of natural disaster or other emergency situation. Have you ever thought about what would happen to you and your family if something similar were to happen in the... ( added 16 days 22 hours ago.) |
| |
|
|
| |
Cluster Fly Season; Look Into Insect Control From Specialists Birmingham -
Jenny Pilley (14)  
At this time of year it is not uncommon to find large amounts of flies in the home or at your business. The most likely type of fly will be a Cluster Fly.
Cluster Flies gather together in lofts, roof spaces and around the edges of window frames in the autumn and winter months.
Often you... ( added 17 days 9 hours ago.) |
Is An Air Over Oil System For You? -
Bill Wade (906)
In order to use compressed air, you first have to compress
it. It’s that compressibility of air that can create problems when you are
trying to use it to stroke an air cylinder smoothly or with consistent stroke
timing.
To product consistent, smooth cylinder rod travel, or... ( added 2 years 306 days ago.) |
Everything about Convection Oven Cooking -
John Stack (693)  
While more expensive than traditional ovens, convection ovens offer various advantages over non-convection models. They can cook food in as little as half the time of static air, and do so at lower temperatures. As a result, foods shrink less increasing yield and lowering effective food cost.... ( added 3 years 105 days ago.) |
Pad Printing Solutions: Sealed Ink Cup System vs. Doctor Blade System -
Benjamin Adner (140)
Over
the past few years the biggest change in pad printing equipment market has been
the widespread use of sealed ink cup systems over open inkwell doctor blade
systems, especially in the US .
However, open inkwell systems are still popular throughout the world and
possess... ( added 3 years 113 days ago.) |
Seven Secrets for Buying an Air Brush Compressor -
Bill Wade (906)
If you're looking for an air-brush compressor,
there are a few things you have to consider. The first big question is to ask
whether this is for home or professional use. Home use doesn't require
the same dependability or rugged construction (and comes with a lower price
tag) while commercial... ( added 3 years 126 days ago.) |
An Introduction to Metal Stamping Machines -
Josh Riverside (4,611)
Metal stamping machines are used to give the exact shape and parameters to the metal products. When a metal sheet is inserted into the metal stamping machine, it can be molded into the exact shape. The kind of shape that has to be given to the product should be pre-determined before putting the... ( added 4 years 35 days ago.) |
What is Metal Stamping? -
Josh Riverside (4,611)
Metal stamping is the process of cutting and shaping metal alloys into specific forms, especially to be used as components for large machinery or structures. Metal sheets can be molded into different pre-determined shapes for use as regular products like pans and cans. The most common alloys that... ( added 4 years 35 days ago.) |
The world's fastest CNC production machining center -
Larry Faulkner (45)
Having spent 3 decades in the machine tool industry and being a person by nature that is not easily impressed, you can bet your last coffee coupon that if I am in fact excited about something, it is worth taking note of.
My story starts over 5 years ago now, I had been asked by one of my... ( added 2 years 30 days ago.) |
Shopping For an Angle Roll Bending Machine -
 - Rob Tendick (2,226)
When it comes to metal fabrication equipment, you may have heard of an angle roll bending machine. Some may refer to it as a section bending machine, but its purpose is still the same - form raw pieces of metal into desired shapes and sizes.
If you have ever seen an angle roll bending machine... ( added 2 years 169 days ago.) |
Magnetism - The Power of Attraction and Repulsion -
Thomas Yoon (4,642)
Thomas Yoon
Undoubtedly, the most important property in the operation of electrical equipment is electromagnetism. It's the property of attraction and repulsion that enables motors, generators, solenoids, relays and other control equipment to function.
Magnets can be classified as permanent or temporary... ( added 2 years 299 days ago.) |
What's a 4/2 Compressed Air Valve? -
Bill Wade (906)
Recently, I published articles on this site entitled: What's
a 2/2 or what's a 3/2 compressed air valve? Here, in the next installment in
this series, is information on the 4/2 style.
The first number in the 4/2 air valve, the four, refers to
the number of "working" air ports... ( added 2 years 332 days ago.) |
Oily Water Separators and Those Magic Pipes -
Ieuan Dolby (1,244) 
Ieuan Dolby
Surveyors and port state inspectors are forever highlighting the fact that they have "found yet another vessel with a supposed magic pipe fitted", another with "no functioning Oily Water Separator (OWS onboard" and yet another with no magic pipe but just the main bilge pump on direct discharge... ( added 3 years 88 days ago.) |
5 More Keys to Choosing Plate Roll Machines -
- Rob Tendick (2,226)
Between diminishing factory orders and increasing labor and energy costs, companies that use plate metal in their fabricating processes are finding their profit margins increasingly pinched.
Yet, manufacturers must still invest in new production equipment -- whether to replace obsolete... ( added 3 years 113 days ago.) |
Don't Use a Needle Valve To Control Your Air Cylinder Speed! -
Bill Wade (906)
Many industrial machines using compressed air as an energy
source, use air cylinders or other pneumatic actuators to do the actual work.
Compressed
air is 'explosive' as it moves from high pressure to low pressure on it's way
back to atmosphere. That means when the air valve... ( added 3 years 115 days ago.) |
5 Keys to Choosing Plate Roll Machines -
- Rob Tendick (2,226)
Between diminishing factory orders and increasing labor and energy costs, companies that use plate metal in their fabricating processes are finding their profit margins increasingly pinched.
Yet, manufacturers must still invest in new production equipment -- whether to replace obsolete... ( added 3 years 120 days ago.) |
The Varied Uses of Diatomaceous Earth Filters -
Anne Sinclair (2,610)
It's hard to believe that the fossilized remains of single-celled plants that lived 15,000 years ago could be of use to us in today's modern world, but scientists have come up with a way to utilize the diatomaceous earth (D.E.) they created by dying in the ocean areas of their world. These... ( added 24 days 4 hours ago.) |
Pressure Sandblasting Pots Superior to Siphon Pots -
Christen Reinke (63)
Sandblasting with a pressure pot is in general, four times
faster than using a siphon pot. Why? A siphon pot will rely on the weight of the
sandblasting media to feed down into the air stream, and thus is prone to
sputtering. This is particularly the
case with light weight blast media, such... ( added 73 days 1 hour ago.) |
Tips To Minimize Pressure Drops In Your Compressed Air System -
Tommy McGuire (558) 
Tommy McGuire
Ask a Question: What causes pressure drop in my compressed air system?
Answer:
Any type of obstruction, restriction, or roughness in the system will cause resistance to air flow and cause pressure drop.
In the distribution system, the highest pressure drops usually are found at the... ( added 1 year 199 days ago.) |
Wrought -Iron Machines by GLASER-Germany -
Anton Zoric (135)
General:
The Automatic Multiple-Purpose Iron Twister GDM 50-3 has been designed for mass-production and successfully approved since years in this kind of production.
The Automatic Multiple-purpose Iron Twister GDM 50-3 twists flat and square iron up to 40 mm in cold condition. it is equipped... ( added 2 years 228 days ago.) |
| |
|
|
| |
Keys To Efficient Press Brake Setup -
- Rob Tendick (2,226)
In the press brake business, like all others, the goal of the metal fabrication equipment company is to provide well-built machinery at an affordable price that fits the buyer's needs and budget. Thus, when searching for press brakes the buyer should be looking for a piece of equipment that will... ( added 2 years 339 days ago.) |
Hydraulic Press Brake Purchasing Tips -
- Rob Tendick (2,226)
In the press brake business, like all others, the goal of the metal fabrication equipment company is to provide well-built machinery at an affordable price that fits the buyer's needs and budget. Thus, when searching for press brakes the buyer should be looking for a piece of equipment that... ( added 2 years 356 days ago.) |
Sizing Guide for Restaurant Grease & Exhaust Hoods -
- John Stack (693)
Please note that this is a reference guide and should not be viewed as a substitute for National or Local Fire Code. Also you must have a Licensed HVAC or Mechanical Contractor to do all of the installation and permitting.
A Commercial, Restaurant, Kitchen, Grease, Exhaust, Type-1, Vent... ( added 3 years 104 days ago.) |
|
|
| |
|
50 Articles Total in this category
Next Page 1 2 3
Submit an Article!
|
|
 for
the most recent articles under Industry / Industrial Equipment ?
|
|
