This is one of the first color
laser printer toner where HP/Canon really seems to have gone out of its way
to make a toner cartridge very difficult to remanufacture. The waste chamber,
which consists of the waste chamber, OPC drum, PCR, wiper and recovery blades,
is plastic welded/glued together. The drum axle/bushings are permanently
attached to the waste chamber. The only way to get them off is to physically
break or cut the cartridge apart. New replacement waste chambers are now
available that include the waste chamber, new removable drum axles/bushings,
foam seals, electrical contacts and PCR holders. The kit will also contain the
screws, springs and plastic pins that will be needed to reassemble the
cartridge. If you want to reuse any of the above parts, you will have to cut the
OEM chamber apart. The waste chamber for 2600n color laser printer toner is also
very small. The aftermarket toner will have to be very efficient to prevent
leakage due to the waste overflowing. When you refill 2600n hp color laserjet
toner, you should notice following factors to guarantee the quality:
1)
Mitsubishi toner is one of the best choice to remanufacture hp 2600n hp color
laserjet toner, physical toner powder is more suitable for refilling color laser
printer toner cartridge.
2) High quality toner cartridge smartchip can
guarantee the page yield of the color laserjet toner.
3) New Hanp opc
drum is value to consider, because the opc drum is easily worn out.
For
more informations about color laser printer toner a nd toner powder, chips for
remanufacturing, please refer the web http://www.skysheen.com/index.html.
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
