All across the country, many homes that were built before the 1960's have wood sash windows. These windows have sloped wood sills outside to drain water away from the window. In addition, there is wood trim on the sides and across the top of each window. By replacing the wood sashes with a vinyl pocket window, the energy efficiency of the window increases tremendously, drastically reducing heating costs during the cold winter months. Another benefit of the vinyl windows is the fact that they are virtually maintenance free. No more painting or having to recondition them like you do with wood.
But, what about the wood that surrounds your windows on the outside? You still have that wood sill on the bottom, and the brick molding around the edge of the opening. You still have to maintain that periodically or, in some cases, replace it due to deterioration. One of the solutions to the problem is to wrap the wood with aluminum. Certainly, aluminum is a more durable material than wood. But, aluminum has to be painted, so you are still dealing with a paint issue. Also, a homeowner cannot install the aluminum without a special bending tool and the knowledge of how to use it properly. So, you have to hire a ptrofessional. But now there is a product that is maintenance free, and can be installed by the homeowner using basic tools. Not only that, but the end result looks better than the aluminum process.
By covering your wood with vinyl, you eliminate the need to ever paint or replace your wood again. Even if you have some rot in the wood, you can repair the damaged wood with filler, then install the vinyl cover, and your window sill will look like new. You need to remove any paint that is peeling before attaching the trim. You cut the sill wrap extrusion with a chopsaw or hacksaw, and you cut it 1 1/2" longer than the sill itself because you have to attach caps on the ends. The sill piece has to be notched to fit around the brick molding on each end. You accomplish that with a jigsaw or hacksaw. You have to use an extreme weather adhesive, like Dynaflex 230 from DAP. If you use an adhesive that can't withstand sub freezing weather, the vinyl can come loose from the wood. The trim that covers the brick molding and surrrounding wood is an L-Shaped piece, and comes in several sizes to fit most applications. It can be ripped down using a table saw, jigsaw, or simple plastic cutting tool. So, no matter what size wood you have around your windows, the L-Angle trim will fit. You can see pictures and learn more about this wrapping process HERE .
John Rocco has been installing replacement windows since 1978.
» left by Lesley from Auburn,MA (3 years 74 days ago.)
Actually no. I wanted instructions on how to remove a rotted sill so I can replace it. Respond to this comment
» left by Mel from RI (2 years 72 days ago.)
i agree with Lesley....i was looking for instructions on how to REPLACE a window sill, not how to BUY window sills...very misleading... Respond to this comment
» left by johnr from Idaho (2 years 72 days ago.)
The article is titled "Repairing wood window sills", not REPLACING WOOD WINDOW SILLS. Respond to this comment
» left by Anonymous (2 years 49 days ago.)
No, I'm looking for advice on how to REPLACE a rotted window sill, not patch, wrap or coat one with vinyl. Respond to this comment
» left by C.H. from Omaha (1 year 132 days ago.)
this was exactly what I was looking for...ideas to repair/replace wood that is around replacement windows
» left by Anonymous (1 year 120 days ago.)
No, misleading - I wanted advise, not an advertisement. Respond to this comment
» left by fred from ontario,canada (1 year 112 days ago.)
as previously stated this article does NOT deal with the subject which was removing a rotted window sill.It serves to promote a product.
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
