Submitted by: Dale Ovenstone(273) Texture Revival Log in to become a member of Dale Ovenstone's Fan Club!
Here in the UK, we texture a variety of stunning patterns & designs straight onto the ceiling & walls using tools such as our fingers, rollers, sponges, rags, brushes, trowels, etc: and your only limit really is your own imagination; but in this article I want to talk about using texturing' combs, to create some amazing affects onto your interior surfaces; these combs are very easy to use with the information from 'Texture Revival' are reasonably priced & now widely available to you thanks to the internet: plus, the methods for applying the texture coating to the desired surface is usually rolled on, sometimes brushed on, or even trowel'd on' instead of the expensivesprayed on' by using a machine, as in some countries.
As you can imagine, the cost in money terms for applying texture coating to your ceiling & walls by using a conventional paint roller makes it possible for the home DIY' enthusiast to have a go yourself' because all you will need is a builders bucket to mix the texture powder in: the tool for mixing the texture powder with, (either an attachment to the power drill, or a plastic texture mixing tool that you attach to a wooden handle:) the unmixed texture powder, or the ready mixed type: a roller & tray to hold the mixture of texture in: & of course, the texture comb to create your design; Besides using a texturing comb to produce really decorative effects onto your ceilings and walls, I find the task of texturing in this way really theraputic & immensly fun because it brings out my creativity for myself & others to enjoy.
Some texturing combs consist of a moulded all in one' design, (almost resembling that of a plastic tile adhesive spreader, but the serrated comb' edge is slightly tighter together/not spaced as wide apart from each other) whereas, the handle, and the serrated (patterning) edge are made from a moulded, plastic material.
The usual length of the comb is around 10 inches long (this is ideal for creating designs onto your larger, as well as smaller ceilings & walls;) Whilst other texturing combs consist of a wooden handle, with a slit cut through it, whereas a piece, or two, of flexible & thin plastic (containing the serrated patterning edge,) is inserted; Texturing combs, if looked after correctly could serve you a long time, but please be aware, do not wash out the combs in boiling water as this could shrivel up the serrated edges, plus also remember that, after texturing many surfaces, the serrated edge could become quite worn down, thus giving you a thinner, and more undesirable pattern depth; To pattern the ceiling, first of all, make sure that the surface is correctly sealed and that the room is cool (no central heating on, please check out my other articles) & it is most important to mix enough texture coating to cover the whole surface area to be textured; secondly, after you have decided which pattern/design your going to attempt, stand at the door entrance to your desired room and look up to the ceiling, it is quite normal to actually start patterning alongside the wall, running across the narrow width of the ceiling, viewing from the door entrance, and running the pattern down to the end of the room (but this depends entirely upon yours, or your customers personal preference.) So, for instance, let us say that we are going to start our pattern from the door entrance wall, whereas, the pattern (once completed) will run down the (longer & narrower) length of the ceiling.
Stand with your back against the wall (in which you intend to start the pattern) & look directly up to the ceiling; this is how your going to work the pattern; as you begin to pattern, the pattern is always behind you, and your always working away from it/ and right across the narrow width of the ceiling, in bands of around three feet wide, & continue down the whole length of the ceiling; now with your back against the wall, hold your comb in the hand that feels the most comfortable for you to texture with; if you hold the comb in your left hand, slide right across with your back against the wall, to the very far corner of the right side of the room, this is the corner that, once you apply your band of texture, your going to start your comb pattern, & run it the width of that particular wall/edge.
If you use your right hand, you start at the far left corner of the ceiling.
In summary, apply the texture to the surface, using your paint roller, roll on a band of mixed texture coating, around half/three quarter inch thickness in depth, right across the narrowest width of your ceiling, from one wall edge to the other.
The band of texture onto your ceiling should be around two roller widths wide: comence to pattern this with your comb:
then continue this method throughout the whole ceiling, continuing right down the length of the whole area.
Everything here is fully covered in Texture Revival;' to help you more, look out for my articles concerning mixing texture & also surface preparation.
When you attempt any texturing tasks, always practice on a small area first for best results.
Thank you for reading, I hope that this article will help you further with your quest in learning to use combs to texture with.
Dale Ovenstone 2008.
This author of this Article has choosen to make this article available with free reprint rights. Click here to copy this article.
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
