Located smack dab on your car’s intake manifold, an EGR [Exhaust Gas Recirculation] valve functions by sending exhaust gas back into the combustion chamber as “exhausted air" is much hotter than intake air. By bringing warmer gas into the combustion chamber, your engine operates much more cleanly and efficiently.
Like any part, your Ford EGR valve or Toyota EGR valve is subject to getting clogged with dirt or crud. A clogged unit may cause your car to stall, hesitate, or idle roughly. Sometimes, simply cleaning the EGR valve with a product like STP carburetor cleaner will resolve the problem. Still, if you take your car in for its MV inspection and the diagnostic tests shows that your EGR valve is not working, you will fail inspection and be forced to swap out the device before bringing your car back in for a follow up inspection. What a hassle, but something you just don’t want to forget about.
Prices on replacement EGR valves are all over the place: some parts are reasonably priced while others will cost you a mint. Your Ford or Toyota dealer will charge you a mint if you purchase one through their parts department, as buying through any dealer can quickly turn into a financial nightmare. Instead of going through all that aggravation, you can save big money by shopping online through a quality wholesaler such as All EGR Valves. As is common with all high quality auto parts wholesalers, you can purchase an EGR valve at a huge discount and save a bundle over dealer mark up prices. Leading wholesalers deal directly with manufacturers, buy in gigantic quantities, negotiate the lowest prices, and pass big savings on to you.
Replacing an EGR valve is a simple process and can be accomplished with standard automobile tools. With your handy Chilton repair manual at your side, you will quickly remove and replace the device and have a strong sense of accomplishment on a job “well done." Best yet, you will have saved yourself plenty of money which you can use for other parts, like the K&B cold air intake that you always wanted!
» left by Larry from Minden, Louisiana (2 years 119 days ago.)
Article was not any help at all. I want someone out there to tell me how to and what special tools will be needed to change out EGR valve on a mercury mountianeer 1998 5.0. Respond to this comment
» left by Anonymous (1 year 150 days ago.)
NO. It does not say HOW to replace the valve. Respond to this comment
» left by Laura from Missouri (221 days 22 hours ago.)
Also does not state that you will need to check for carbon in the intake and scrape it out with something like a piece of wire hanger with a hook in the end, being very careful not to let any chunks go in and mess up your engine. Also make sure part comes with gasket-- some don't and will have to ask for one. Otherwise you are home with your car torn apart before you realize you don't have it. Respond to this comment
» left by Aly Youssef from New jersey (136 days 10 hours ago.)
Great help. Thanks
Was this article helpful to you? Leave a Public Comment or
Question:
This Article has been viewed 7,115
times.
Article added to SearchWarp.com on Monday, January 23, 2006 View other articles written by Matthew C Keegan(2,999)
If you found this article interesting, you may want to check out:
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
