Roger Griffiths(3) RMG Group LLC Log in to become a member of Roger Griffiths's Fan Club!
Everyone who wants to own a house knows that it is not easy. With the rising costs of construction materials, everyone is looking for more affordable ways to build their own houses. Some don't hire contractors and just do it themselves. Others look for economical means that can save them time and money while achieving their desired dream home.
One of the most inexpensive and faster building method is through the use of drywalls. It involves the building of interior walls without the use of mortar. Anyone can do it, even those who are inexperienced in home construction.
Drywalls can be installed quickly and easily. And here are some tips for all drywallers, both seasoned and new alike.
One of the most important things to do in order to drywall quickly and easily is to prepare. Inspect your workplace and determine the exact work to be done. Remember that drywalling is not only done for walls but also on ceilings. Gather all the tools and equipment that you will need. To be able to drywall quickly and easily, some of the more important tools you need are:
t-squares,
sharp utility knife
tool belt
keyhole saw
pencil, pen or chalk
ladders and benches
drywall screws and nails
drywall drill
electric screwdriver
crowbars and hammers
sanding paper
mudding and taping knives
various joint compounds
sheetrocks or the boards
To drywall quickly and easily, you must be familiar with the measuring and cutting of the boards. Make sure that each board doesn't overlap with each other. Leave a small amount of space between each board as much as possible.
After you have measured and cut the boards, the next thing to do in order to drywall quickly and easily is to mount the boards on the wall supports. You can use a hammer or you can use an electric screwdriver. You can also look for wall studs. These can serve as your guide on the position of your boards.
Now that the wall is in place, you can now finish the joints. First off is to tape the various joints in order to hide the edges of the boards. Also make sure that you hide the nail and screw heads. These will make the wall look like one whole board. Afterwards cover it with a compound joint. Wait for these to dry before applying another coat. Again wait for these to dry and then apply a finishing coat. All in all, it should take at least three coats.
The last thing to do to drywall quickly and easily is to sand the walls. These will make the walls smooth and pleasant to touch. It will also make the wall ready for whatever design you want on it. Either you apply some paint or you put some wallpaper.
And you're done. All it really takes to drywall quickly and easily is a little bit of hard work, perspiration and the willingness to be injured sometimes by hammers and wood splinters. But then, it's just a small price to pay to be able to have that much coveted dream house. http://www.diydrywallguide.com
Was this article helpful to you? Leave a Public Comment or
Question:
This Article has been viewed 30
times.
Article added to SearchWarp.com on Wednesday, September 17, 2008 View other articles written by Roger Griffiths(3)
If you found this article interesting, you may want to check out:
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
