1. Float glass - which side do you paint enamel on?
Float - or window - glass has what is called a tin or tinned side and an air side. This refers to the modern method of making sheet glass. Molton glass is floated on to a pool of liquid tin, where gravity and surface tension do their job to smooth and polish the sheets of glass.
It is the side touching the tin the tinned side - that you want to avoid when using glass paint, you want to paint on the air side. The residue of oxides left on the tin side is likely to adversely affect the colours of your stained glass paint during firing.
So how do you know which side is the tin side? You can buy a short wave UV flashlight sometimes called a Tin Side Detector and look at your float glass in a darkened room. The tinned side will have a fuzzy white glow which you wont see on the air side.
2. How do you get vibrant colours with glass paint?
The secret is to fire multiple thin layers of stained glass paint, rather than one thick layer. You have more control over your work this way, and you wont risk the glass paint bubbling up, or becoming too dark to see through.
3. Increase depth of glass paint colour by sandblasting
If transparency isnt important, you can make your glass paint colours more vibrant by lightly sandblasting the glass before you apply the paint. The coarseness of the grit also makes a textural difference to the finished result. Normally one layer of screen printed transparent glass paint is a bit wishy-washy; sandblasting first makes the colour remarkably strong.
4. I want to use glass painting on plates!
If youre thinking of making tableware that has glass paint on it, it must, must must be lead free! Let the manufacturers know that youre intending to make items for eating from, and they will point you in the direction of their lead-free ranges. These can either be transparent or opaque.
5. How can I save electricity and precious firing time?
By mixing your glass paint for your first layer with Damar varnish and distilled turpentine instead of the more usual water and gum arabic. Its good for line work or printing, but not matting unless you want to ruin your badger brush. Let it dry thoroughly the varnish will harden - before applying a second coat that is mixed with water. This second application wont disturb the first as it it water based, but watch out theres no room for error and wipings off you have to be confident! You can then fire these two layers at the same time.
Milly Franceshas been a self-confessed stained glass addict for over thirteen years - she teaches it, owns a company specialising in it, and has a masters degree in it. VisitEverything Stained Glassfor more quality information on stained glass, includinghow-to guidestop tips, artist profiles and buying advice. See you there!
This author of this Article has choosen to make this article available with free reprint rights. Click here to copy this article.
Was this article helpful to you? Leave a Public Comment or
Question:
This Article has been viewed 89
times.
Article added to SearchWarp.com on Wednesday, October 08, 2008 View other articles written by Milly Frances(266)
If you found this article interesting, you may want to check out:
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
