Joe Farinaccio(78) ID Theft Help 911 Log in to become a member of Joe Farinaccio's Fan Club!
If you've never built a small trimaran (or any other type of sailboat before) then you'll likely entertain a few doubts. It's only natural.
You'll probably ask yourself questions such as, "Can I really do this?" ... "How long is a boat building project realistically going to take?" ... "Should I go with a boat that has a frame and uses a cold-molded construction, or should I just go with a simple, straightforward Stitch and Glue type of construction?"
These are good questions. These are important questions.
Building any boat properly with wood requires good, useful information to help you get through the building process. Thankfully, there is some good info out there about wooden construction.
While it would be nice to find a little bit of this type of content provided in a unique, web-based environment, most of the really good information is still found in books. But more very good info is now making its way into the marketplace on DVD.
Whatever info resource you use, you'll want to make sure it includes more than details about marine-grade plywood ... scarfing joints ... strip plank ... frame and stringer ... diagonal plank on frame and stringer ... or other forms of construction.
Your resources should thoroughly cover how to safely use epoxy. Epoxy has proved itself to be a wonderful invention. But great care must be exercised when working with it.
Epoxy can be used to construct a very strong, durable hull out of different pieces of wood so that it becomes essentially "monocoque" in structure. Thus, it's popular with many wooden boat builders for obvious reasons. However, the same chemical properties that result in it being such a wonderful tool in boat building can also make it a dangerous thing if not properly handled.
The fumes can make you very sick. Epoxy chemicals on the skin can result in terrible rashes, or even poison your whole system.
Not good.
In essence, before you work with epoxy, be sure to safeguard yourself by reading up on the process, and by following all the safety practices. There is no good reason to damage your health when simply following the proper procedures will prevent harm.
Using medical gloves such as latex ones is very important. Using a respirator is equally important. And clean up epoxy-related residue afterwards. This includes setting aside any clothes that might have absorbed epoxy. It's something that requires diligence and paying attention in order to follow through completely.
Safe boat building is smart boat building. The plain truth is that you can construct a small tri out of wood materials and end up with a super boat by doing things in a healthy way.
--------
Joe Farinaccio (a.k.a. "the small tri guy") writes about small trimarans. Go to his website at http://www.SmallTrimarans.com for more info and downloadable resources. His new book on Small Trimarans is scheduled to be published in early 2009.
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
