If a Layer Two switch doesn't have the capabilities to run IGMP Snooping, it will be able to run CGMP - Cisco Group Membership Protocol. CGMP allows the multicast router to work with the Layer Two switch to eliminate unnecessary multicast forwarding.
CGMP will be enabled on both the multicast router and the switch, but the router's going to do all the work. The router will be sending Join and Leave messages to the switch as needed. PIM must be running on the router interface facing the switch before enabling CGMP, as you can see:
When CGMP is first enabled on both the multicast router and switch, the router will send a CGMP Join message, informing the switch that a multicast router is now connected to it. This particular CGMP Join will contain a Group Destination Address (GDA) of 0000.0000.0000 and the MAC address of the sending interface. The GDA is used to identify the multicast group, so when this is set to all zeroes, the switch knows this is an introductory CGMP Join, letting the switch know that the multicast router is online.
The switch makes an entry in its MAC table that this router can be found off the port that the CGMP Join came in on. The router will send this CGMP Join to the switch every minute to serve as a keepalive.
A workstation connected to port 0/5 now wishes to join multicast group 225.1.1.1. The Join message is sent to the multicast router, but first it will pass through the switch. The switch will do what you'd expect it to do - read the source MAC address and make an entry for it in the MAC address table as being off port fast 0/5 if there's not an entry already there. (Don't forget that the MAC address table is also referred to as the CAM table or the bridging table.)
The router will then receive the Join request, and send a CGMP Join back to the switch. This CGMP Join will contain both the multicast group's MAC address and the requesting host's MAC address. Now the switch knows about the multicast group 225.1.1.1 and that a member of that group is found off port fast 0/5. In the future, when the switch recieves frames destined for that multicast group, the switch will not flood the frame as it would an unknown multicast - the switch will forward a copy of the frame to each port that it knows leads to a member of the multicast group.
Two major benefits of CGMP are the explicit Join and Leave Group messages.In the next part of this BCMSN exam tutorial, we’ll take a look at the Leave Group messages.
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNP andCCNA tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages.
You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions!Details are on the website.
For a FREE copy of his latest e-books, “How To Pass The CCNA" and “How To Pass The CCNP", just visit the website!You can also get FREE CCNA and CCNP exam questions every day!Pass the CCNP exam with The Bryant Advantage!
Log in to become a member of Chris Bryant CCIE 12933's Fan Club!
No comments yet.
Was this article helpful to you? Leave a Public Comment or Question:
This Article has been viewed 208 times.
Article added to SearchWarp.com on 4/18/2006 11:02:12 AM. View other articles written byChris Bryant CCIE 12933(13,765)
If you found this article interesting, you may want to check out:
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
tweet this!