Changing Time and/or Date on Popular Phone Systems

Inter-tel Axxess - Networked Systems Only

• While on hook, enter the Set Network Date and Time feature code (9810). Your displays the current date.
• If you do not need to change the date, press "#" or ACCEPT to skip to the time prompt.
• Use the dialpads to enter month day and year mm-dd-yy format.
• If you make a mistake, press "MUTE" to backspace or "*" to start over.
• Use the dialpad buttons to enter the time in hours and minutes "0900" for 9:00.
• If 12-hour display is used, the display shows AM or PM. Press "1" for AM and "2" for PM.
  

Inter-tel Axxess - Non-Networked Systems

• While on-hook, enter "9800" for Set Date/Time feature. The current date will display.
• Press "#" to skip. To change, use keypad to enter the month, day and year 010305=January 3, 2005). The new date will display.
• Use keypad keys to enter the time in hours and minutes (0900=9:00).
• If the system is set for 12-hour format, the display will show SELECT AM OR PM (AM=1 PM=2). Select 1 or 2.
  The display reads, "SYSTEM DATE AND TIME UPDATED".

Inter-tel Axxent

• While the phone is idle, enter "9800". Display shows "DATE:"
• Enter Date MM:DD:YY. Press "#" to skip date entry.
• The display will show "TIME". Enter the time in 12-hour format.
• The display will then show: "Press 1 for AM, press 2 for PM". Select one.
• Press "#" to exit.

ESNA Telephony Office Linx

Date:

• Go to main menu on ESNA (Telephony Office-Linx window).
• Choose "System" on the tool bar, then "Commands".
• Enter current date MM:DD:YYYY.
• Press "Execute".
• Choose "Exit".
• Minimize screen.

Time:

• Go to main menu as above.
• Choose "System" on the tool bar, then "Commands".
• Enter current time hh:mm (1:45pm would be entered 13:45).
• Press "Execute"
• Choose "Exit"
• Minimize screen.

Executone Infostar VX II Voice Mail

• Press "SPKR" or lift handset. Press "436" to enter voice mail.
• Press the "#" key, mailbox "5000", press password "5000" (default on most systems, yours may differ) then the "#" key.
• Press "5" to change time and date.
• After the current date plays, enter the current date MM:DD:YY.
• After the time plays, enter the new time HH:MM:SS in military format.
• When finished, press the "*" key until you hear "exiting the system".
  

Isoetec Medley

• Press the "Menu" key.
• Press "Park 3".
• Enter the password (default is "456")
• Press "#".
• Press "1" for System Functions.
• Press "4" for System Clock.
• Enter the time in 12-hour format.
• Press "#"
• Press AM or PM by pressing "Park 3" in the LCD screen.
• Press "#" to confirm.
• Hang up or press "HF".

Iwatsu Omega Voice VMI Voice Mail System
All programming must be done from extension 201.

Change Time and Date in Voicemail:

• Press "SPKR" or lift the handset and press "47".
• Press the "#" key, dial mailbox 201 and pass code "201".
• Press "4" for system administrator.
• Press "5" for changing the time and date.
• Press "1" to play, "2" to set time.
• After hearing the time, enter the new time HH:MM in military style (1417 is 2:17PM).
• Press "9" to return to the menu.
• Press "6" to change date.
• Press "1" to play, "2" to change.
• Enter the new date MM:DD:YY.
• Press "9" to return to the main menu. Hang up.

Change System Time from Phone:

• Press "SPKR".
• Press "FEAT"
• Press "64".
• Enter the time in military style "HH:MM"
• Press "SPKR".

Norstar Meridian CICS
Time:

• Press "FEAT".
• Press "*".
• Press "*".
• Press "266344" (CONFIG) or "23646" (ADMIN).
• Enter password "23456" (ADMIN) or "72787" (SCPLUS).
• You will see "Terminals & Sets".
• Press "Next" five times.
• Press "Show"
• When you see "Hour", press "Change" or "Next" to skip.
• Type in the hour using military time as a 2 digit number.
• Press "Next".
• When you see "Minutes", press "Change" or "Next" to skip.
• Type in the minutes using a 2 digit number.
• Press "Next".

Date:

• When you see "Year", press "Change" or "Next" to skip.
• Type the year in 2-digit format.
• Press "Next".
• When you see "Month", press "Change" or "Next" to skip.
• Type the month in 2-digit format. Press "Next".
• When you see "Day", press "Change" or "Next" to skip.
• Type the day in 7-digit format.
• Press "Next".
• When you see "End of List", Press "Rls" to exit.

PCS Digital
Set date and time through the display:

• Press "Feat" "#" "0".
• At the "CHK PSWD:_ prompt, Enter "0000" (Default Password).
• From the soft menu, press "SAVE".
• Select "TIME" and press "SHOW".
• Press "CHG" and enter the "YEAR" and press "SAVE" then "NEXT".
• Press "CHG" until the correct month appears, then press "NEXT".
• Press "CHG" and enter the correct day, press "SAVE" and then "NEXT".
• Press "CHG" until the correct weekday is selected and then press "NEXT".
• Press "CHG" and enter the correct hour, press "SAVE" and then "NEXT". S

Set date and time through the phone:

• Press "24"
• Wait to hear the Auto Attendant Greeting
• Press "#".
• Press "#" "0".
• Enter the password (default is 9#56).
• Press "4" for "Date & Time".
• Press "1" to review date.
• Press 2 to change date and time
• Enter time in 24 hour (military) format.
• Enter the date MM:DD:YY.
  

Toshiba DK

• From receptionist station, without lifting the handset, press << Intercom >>
• Dial << #652 >>
• Dial the time military format HH:MM:SS.
• Press << Redial >>.
• Press speaker.

Comdial DX-80

• Press "Feature #*" and enter your password (default is "########").
• Press "Show" and "0814"
• Press "Save" and then "Show".
• The option to change the year appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the year and then "Save" and "Next.
• The option to change the month appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the month and then "Save" and "Next.
• The option to change the day appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the date and then "Save" and "Next.
• The option to change the weekday appears. Press "Next" to skip. To change, press "Chg" until you see the day you want. Press "Save" and "Next.
• The option to change the hour appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the hour in military format and then "Save" and "Next.
• The option to change the minutes appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the minutes and then "Save".
• Press the "On/Off" button to exit the programming mode.
  

Comdial DSU/DSU II

• From extension 10, press "*#746*"
• Option One Dial "01"
• Dial 00-99 for year
• Dial 10-12 for month
• Dial 1-31 for day
• Dial 00-23 for hour
• Dial 00-59 for minute.

Option Two

• Dial 00-23 for hour
• Dial 00-59 for minute
• Dial "#" to assign hours and minutes.
• Press speaker to exit.

Executone Isoetec IDS via Operator's Terminal

• While the terminal is idle, press and hold Ctrl and "C". Release both keys. The cursor moves to the Hour field.
• Enter the 2-digit hour in 24-hour clock format (ie., 16 for 4pm). The cursor moves to the Minutes field.
• Enter the 2-digit minutes. The cursor moves back to the Hour field.
• Press the Return key. The cursor moves to the Month field.
• Enter the 2-digit month, day and year. The system inserts the "-" automatically.
• Press and hold Ctrl and "C". Release.

Executone CX 816

• From station 100, take the handset off-hook. Dial "*".
• Dial "7764" (PROG).
• Press the "FLASH" button.
• Dial "28".
• Enter time and date as follows: YYMMDDHHMMSS.
• Press the "HOLD" button.
• Enter time and date in the following formats-
  Year (YY) =00-99
  Month (MM) =01-12
  Day (DD) =0-31
  Hour (HH) =00-24
  Minute (MM) =00-60
  Second (SS) =00-60

Inter-tel GLX-PLUS

Time

• While on-hook, press "SPCL" and enter the Program Time/Date feature code (4)
• Enter the Program Time feature code (1). Display will show TIME XX:XX
• Enter the 2-digit number for hour (00-24) and 2-digit for minutes (00-59).
• Lift and replace the handset.

Date

• While on-hook, press "SPCL" and enter the Program Time/Date feature code (4).
• Enter the Program Date feature code (2). Display will show DATE DAY MON XX
• Press "*" until the correct day is displayed. Press "#". Repeat for month and date.
• Lift and replace the handset.

Year

• While on-hook, press "SPCL" and enter the Program Time/Date feature code (4).
• Enter the Program Date feature code (3). Display will show YEAR:XXXX.
• Enter 4 digits for the year (0000-9999).
• Lift and replace the handset.

Inter-tel IMX 1224/2460

• While on-hook, press the "SPCL" key and enter the set time of day feature code (021). Display will show "SET TIME OF DAY".
• Use the keypad to enter the time in hours and minutes. Then press "*" for AM or "#" for PM. Display will show "SET DATE MM:DD:YYYY".
• Use the keypad to enter the month, day and year. Backspace to correct mistakes by using the "MUTE" key. Display will show "SET DAY OF WEEK SUN".
• Select the day of the week by scrolling through the selections. Press "#" to go forward and "*" to go back. When the desired day is displayed, press the "SPKR" key to end.

Comdial DXP

• Press "Intercom #0*".
• Select "01".
• Enter date (MM:DD:YY).
• Enter time (HH:MM).
• Press "#" to end.

Courtesy of Main Resource, Inc. Visit us at www.MainResource.com or call 800 362-6740 for all your Business Phone System needs.