Search:

Writers' Community!

Article Submission
We Need YOUR Articles!
We'll Promote Them for FREE!

Author Login

New Authors
Register Here


Now Serving 5,636 Authors
47,130 Quality Articles
& 5,411 Current Users Online!
Featured Authors
Sara O'Rourke (275)
David Tanguay (6,669)
Susan Thom (8,304)
Abigail Richards (5,960)
Robert Melaccio, Sr. (6,698)
Walter Rhett (3,169)
mogama (16,604)
Terry Mitchell (2,295)
Ben Jones (5,262)
Lee Baucom (132)
Gregory Lewis (45)
Jane Bullard (1,616)
Tex Norman (1,210)
Christine Akiteng (68,968)

View All Featured Authors
Most Recent
A Brief History of Forklifts

Compressed Air Hose Leaks and Air Hose Saftey

Compressed Air Hose Leaks and Air Hose Saftey

Air Compressor Trouble Shooting Tips

Tips To Minimize Pressure Drops In Your Compressed Air System

Lubricating Worm Gears

Ozone Cleaning in the Water Purification Process

Parts Cleaner Gravimetric Testing Procedures

Reverse Osmosis Process in Manufacturing

The Ultrasonic Parts Cleaner Gains Popularity

Home » Categories » Industry » Industrial Equipment » An Introduction To Compressors » Printer Friendly

An Introduction To Compressors

Rated 2.5 out of 5
No Reader Ratings Available ?
Rate It  /  View Comments  /  View All Articles submitted by Thomas Morva
Submitted Tuesday, June 20, 2006
Submitted by: Thomas Morva (7,164)
Log in to become a member of Thomas Morva's Fan Club!


Compressors are machines that compress air or gas. Compression is achieved through the reduction of the volume that the gas (or air) occupies. As a side effect of the minimization of volume, the temperature of air or gas increases.

The higher the compression ratio, the higher the temperature tends to rise. However, compressor manufacturers do take this into consideration. The problem is resolved by compressing on a per-stage basis and simultaneously cooling the gas.

There are many compressor types. Different compressor types achieve different compression ratios. Moreover, the horsepower that different compressors can achieve varies from 1 to 2 HP (Horsepower), up to a few thousand HP. Some compressors require oil in order to operate while others do not.

The most important compressor designs are listed below.

Reciprocating compressors are equipped with a crankshaft, which drives the pistons. They are commonly found in versions that produce 5 to 30 HP. However, larger ones used for industrial purposes can produce up to 1,000 HP.

Centrifugal compressors are used for heavy industrial purposes. Centrifugal compressors produce from ~100 HP up to a few thousand HP. They are usually stationary, and one of their applications is small gas turbine engines.

Rotary screw compressors are compressors aimed at commercial use. Their horsepower varies from 5 to 500 HP, and they are usually employed as superchargers in automobile engines.

Diagonal/Mixed-flow compressors are similar to centrifugal compressors except for some technical characteristics.

Axial-flow compressors are mostly used in large gas-turbine engines.

Scroll compressors are not as efficient as rotary screw compressors. They can be found as superchargers in automotives.

Along with the uses listed above, compressors are used in fields such as jet engines, refrigeration, medicine manufacturing, SCUBA diving, turbochargers, submarines, and air conditioning.





Reprint Rights

Log in to become a member of Thomas Morva's Fan Club!

Comments on this article:
No comments yet.


Was this article helpful to you? Leave a Public Comment or Question:

 

This Article has been viewed 444 times.
Article added to SearchWarp.com on Tuesday, June 20, 2006
View other articles written by Thomas Morva (7,164)


If you found this article interesting, you may want to check out:

Disclaimer:  All information on this site is provided for informational purposes only! By no means is any information presented herein intended to substitute for the advice provided to you by any health care or other professional or organization.


Today's Most Popular
Everything about Convection Oven Cooking

Wrought -Iron Machines by GLASER-Germany

Seven Secrets for Buying an Air Brush Compressor

Is An Air Over Oil System For You?

Don't Use a Needle Valve To Control Your Air Cylinder Speed!

Air Compressor Trouble Shooting Tips

Sizing Guide for Restaurant Grease & Exhaust Hoods

5 More Keys to Choosing Plate Roll Machines

The world's fastest CNC production machining center

Compressed Air Hose Leaks and Air Hose Saftey

Home  |  FAQ's  |  Contact  |  Terms of Service  |  Article Submission Guidelines  |  Writers' Contests  |  Privacy  |  Mission / About
Copyright � 1999-2008 SearchWarp.com, All Rights Reserved - SearchWarp.com is an IcoLogic, Inc. Company