The Self-Diagnostic Safe-T-Beam System alerts homeowners of improper installation or malfunctions with its new self-diagnostic feature. With this system, a closing door will be reversed automatically when objects pass through its infrared beam.
Plus, by using its red and green LED indicators, our new system will send a self-diagnostic code to help you quickly identify problems and solutions.
Please use the following guide to diagonose problems with an LED Diagnostic Code on Intellicode-equipped Genie garage door opener.
» left by Richard Haper from Key Largo, FL (3 years 354 days ago.)
The symptom: green on, red off says wiring to transmitter is bad. This is incorrect. The wiring is good...the transmitter is bad. Respond to this comment
FANTASTIC-THIS INFO IS NOT ON THE INSTALLATION SHEET...POST FAC TO... I FOUND IT IN THE OPERATORS MANL . BUT I FOUND IT HERE FIRST...GREAT PLACE... WHEN THE CUSTOMER SERVICE 1-800 # is closed for the week end .
Was this article helpful to you? Leave a Public Comment or Question:
This Article has been viewed 3,231 times.
Article added to SearchWarp.com on 6/16/2005 11:26:35 AM. View other articles written byMarwest Access Controls(3,647)
If you found this article interesting, you may want to check out:
Disclaimer: All information on this site is provided for informational purposes only! By no means is any
information presented herein intended to substitute for the advice provided to you by any health care or other professional
or organization.
